• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : AX
• - Belt width : 13 mm
• - High belt : 8 mm
• - Inside length : refer to the last number in every product names, for example : CTAX100, so the inside length is 100 inches. 

• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : ZX
• - Belt width : 10 mm
• - High belt : 6 mm
• - Inside length : refer to the last number in every product names, for example : CTZX18, so the inside length is 18 inches. 

• SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
•  
• Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
•  
• Here are the product dimension : 
• - Belt width : 13 mm 
• - High belt : 10 mm
• - Inside length : refer to the last number in every product names, for example : CLSPA1000, so the inside length is 1000 mm.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• Type of belt : 5 M 
• Pitch : 5 mm
• Pitch diameter : 43.42 mm
• Outside diameter + flange : 50 mm 
• Teeth : 28
• Belt width : 15 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

1. Type of belt : S 14 M 
2. Pitch :  14 mm
3. Pitch diameter : 175.46 mm
4. Outside diameter + flange : 186 mm
5. Teeth : 40
6. Belt width : refer to the last number in every product name. (example : ST40-S14M115, so the belt width is 115 mm) 
7. Type of pulley : 1
8. Material : Cast iron
9. Flange : With flanges 

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter :95 mm  
• Outside Diameter : 135 mm 
• High : 28 mm
• Screws : 18
• Type of Screws : M10

• Locking assembly with single taper design. Provides good concentricity and is self centering. 
• SITLOCK® 6 is suitable for applications with medium torques.
•  
• For the dimension of the product, please download the catalog in the document section.

• SIT-LOCK 14 are shrink discs for external, series "14", are characterised by a single tapered ring instead of opposite tapers of the 3 pieces shrink discs SIT-LOCK series "11". The SIT-LOCK 14 Shrink discs offer a better concentricity and centering and very good balancing. These features make the series highly suitable for mid-high speed applications.
•  
• SIT-LOCK 14 are manufactured in five different types :
• - 14-21 for mid torque transmission
• - 14-22 for high torque transmission
• - 14-81 for very high torque transmission
• - 14-23 eqivalent in size to the type 14-22 but able to transmit an extra 20-30% of torque
• - 14-83 eqivalent in size to the type 14-81 but able to transmit an extra 20-30% of torque

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 132.03 mm
• Outside diameter + flange: 137 mm 
• Teeth : 33
• Belt width : 3.00 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges