• MUSTANG® SPEED-SUPER TORQUE synchronous belts combine the construction of the construction of the MUSTANG® SPEED and the tooth profile of the SUPER TORQUE.
•  
• The result is power rating two times higher compared to first generation of SUPER TORQUE.
•  
•  Execution with Aramid tensile members is also available for high torque at low speed applications.
•  
• Here are the product dimension : 
• - Pitch length : the numbers writen in every product name after "CMST" is pitch length. For example, CMST1240-S8M20, so the pitch length is 1240 mm. 
• - Width : refer to the last number in every product names, for example, CMST1240-S8M20, so the inside length is 20 mm.
• - Pitch : 8 M
• - Teeth no. : 110

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 69.93 mm
• Outside diameter + flange : 77 mm
• Teeth : 28
• Belt width : refer to the last number in every product name. (example : ST28-S8M20, so the belt width is 20 mm) 
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges 

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
•  
• For the dimension of the product, please download the catalog in the document section.

• Shrink discs are external locking devices which are installed over hub projections. By locking the screws, radial pressures act on the hub allowing an effective and solid connection.
• Recommended for medium and high torque. For SIT-LOCK® is also available in "SPLIT" and "HALF" for special applications.
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 467.56 mm
• Outside diameter + flange: - 
• Teeth : 116
• Belt width : 1.00 inch
• Type of pulley : 5
• Material : Cast iron
• Flange : Without flanges

• Extensible transmission high speed series "H" (DIN 808) 
•  
• High speed joints series "H", type "HA", with needle roller bearings.
• Special executions on request.
•  
• Here are the dimension of product : 
• Outside diameter : 50 mm 
• Inner diameter : 25 mm 
• Length of half joint : 108 mm 
• Full length : Min. and max. length upon request 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.