• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 200 mm
• Outside Diameter : 205.6 mm
• Groove : 1

No description for this product yet.

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 236 mm
• Outside Diameter : 241.6 mm
• Groove : 3

Dimensions in milimeters:

Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 5050 (125.125)
• - Bore : we provide taper bushing with minimal bore 50 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC125125F100 (5050X100MM), so the max bore is 125 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC125125F100 (5050X100MM), so the width is 125 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC125125F100, so the bore size is 100.

• Taper Bush : 3535
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 400 mm
• Outside Diameter : 409.6 mm
• Groove : 5

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 42.20 mm
• Outside diameter + flange: 46 mm
• Teeth : 27
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

No description for this product yet.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 24.60 mm
• Outside diameter + flange: 30 mm
• Teeth : 16
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPB with taper bush 1610 :
• - Belt type : SPB
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT100SPB1 (1610); so, the pitch diameter is 100 mm
• - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter. 
• For example, the product is PBT100SPB1 (1610); so the outside diameter is 100 + 7 = 107 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT100SPB1; so, the groove is 1
•  
• See recomendation taperbush below.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1008 (25.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2520F09 (1008X09MM), so the max bore is 25 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2520F09 (1008X09MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2520F09, so the bore size is 9.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 50.10 mm
• Outside diameter + flange: 55 mm
• Teeth : 32
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 72.26 mm
• Outside diameter + flange: -
• Teeth : 45
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : Without flanges

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Coupling are available from stock, both the standard and the "long" hub execution, which entirely covers the motor shaft.
•  
• Here are the dimensions of couplings with"long" hub execution :
• Outside diameter of sleeve : : 52 mm 
• Outside diameter of the hub : 35 mm 
• Total length : 104 mm 
• Length of sleeve : 41 mm 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 160 mm
• Outside Diameter : 167 mm
• Groove : 4