• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 68.15 mm
• Outside diameter + flange: 73 mm
• Teeth : 22
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

• High speed precision joints with needle roller bearings series "H"(DIN 808) 
• - Roller bearings lubricated for life. No maintenance required.
• - Precise and versatile, silent and smooth running; wide application field.
• - Max. angel : 45° type "H",90° type "HD", max. speed 4.000 rpm.
• - Special executions upon request. 
•  
• Here are the dimension of product : 
• Outside diameter : 80 mm
• Inner diameter :  40 mm
• Length of half joint : 80 mm
• Full length : 160 mm

• Inner Diameter : 60 mm
• Outside Diameter : 90 mm
• High : 33 mm
• Screws : 8
• Type of Screws : M8

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1108 :
• - Belt type : SPZ
• - Taperbush : 1108
• - Shaft diameter range : 11 - 28 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT063SPZ2 (1108); so, the pitch diameter is 63 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT063SPZ2 (1108); so the outside diameter is 63 + 4 = 67 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT063SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Inner Diameter : 110 mm
• Outside Diameter : 155 mm
• High : 44 mm
• Screws : 8 
• Type of Screws : M12

No description for this product yet.

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 95.65mm
• Outside diameter + flange: 104 mm
• Teeth : 24
• Type of bush : 1610; max bore : 42 mm
• Belt width : 1.00 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flange 

• Type of belt : 5 M 
• Pitch : 5 mm
• Pitch diameter : 56.16 mm
• Outside diameter + flange : 62 mm 
• Teeth : 36
• Belt width : 25 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

Dimensions in milimeters:

Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE

No description for this product yet.

No description for this product yet.

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 92mm 
• Outside diameter of the hub : 65mm 
• Total length : 88mm 
• Length of sleeve : 51mm 

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 34.25 mm
• Outside diameter + flange: 36 mm
• Teeth : 22
• Belt width : 10 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 37.40 mm
• Outside diameter + flange: 40 mm
• Teeth : 24
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.