• Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive. 
•  
• Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives. 
•  
• The product size : Example for HPPD 1040 P8M 20
• - !040 = Pitch length (mm)
• - P8M = Pitch 
• - 20 = Belt width (mm)

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 100.49 mm
• Outside diameter + flange : 108 mm 
• Teeth : 40
• Belt width : 20 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 100 mm 
• Outside diameter of the hub : 68 mm 
• Total length : 104 mm 
• Length of sleeve : 50 mm 

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 35.62 mm
• Outside diameter + flange: 40
• Teeth : 12
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 20 mm
• Outside Diameter : 47 mm
• High : 20 mm
• Screws : 8 
• Type of Screws : M6

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Product detail 
• Outside diameter : 105 mm
• Max bore : 48 mm
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

Dimensions in milimeters:

Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 67.35 mm
• Outside diameter + flange: 77 mm 
• Teeth : 17
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

No description for this product yet.

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 90.30 mm
• Outside diameter + flange : 98 mm 
• Teeth : 36
• Belt width : 20 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin. 
•  
• The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free. 
•  
• The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
•  
• Here are the dimensions of product : 
• Outside diameter : 66 mm
• Length : 47 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 40 mm 
• Outside diameter of the hub : 24.5 mm 
• Total length : 50 mm 
• Length of sleeve : 37 mm 

No description for this product yet.

• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 64.17mm
• Outside diameter + flange: - 
• Teeth : 40
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : Without flanges

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.