• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3535 (90.90)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC9090F25 (3535X25MM), so the width is 90 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC9090F25, so the bore size is 25.

• Inner Diameter : 160 mm
• Outside Diameter : 210 mm
• High : 54 mm
• Screws : 11
• Type of Screws : M14

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 4040 (100.100)
• - Bore : we provide taper bushing with minimal bore 40 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC100100F100 (4040X100MM), so the max bore is 100 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC100100F100 (4040X100MM), so the width is 100 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC100100F100, so the bore size is 100.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 132 mm
• Outside Diameter : 137.6 mm
• Groove : 3

Dimensions in milimeters:

Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 90.30 mm
• Outside diameter + flange : 98 mm 
• Teeth : 36
• Belt width : 30 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 161.60 mm
• Outside diameter + flange : 168 mm
• Teeth : 64
• Belt width : 30 mm
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• TRASCO® ES is our zero backlash coupling designed to compensate for misalignment and vibration dampening for indexing applications. The compact design of TRASCO® ES makes it the right choice for all precise motion applications.
•  
• The TRASCO ES consist of two hubs, which are either made of high-strength aluminium (up to the 38/45 size) or steel (from size 42) that are connected with an elastic element.
•  
• Spider detail 
• Color : Red
• Shore : 98 Sh.A
• Compound : Polyurethane 
• Admissible Temperature [°C] : the rang is between -30 and +90°C

• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 74.55 mm
• Outside diameter + flange: 80 mm
• Teeth : 24
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 126.57 mm
• Outside diameter + flange : 134 mm 
• Teeth : 29
• Belt width : 40 mm
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges 

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1008 (25.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2520F09 (1008X09MM), so the max bore is 25 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2520F09 (1008X09MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2520F09, so the bore size is 9.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1108 (28.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2820F10 (1108X10MM), so the max bore is 28 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2820F10 (1108X10MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2820F10, so the bore size is 10.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 90.30 mm
• Outside diameter + flange : 98 mm
• Teeth : 36
• Type of bush : 1610
• Belt width : 20 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.