No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 112.75 mm
• Outside diameter + flange: 118 mm
• Teeth : 36
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 26.98 mm
• Outside diameter + flange: 30 mm 
• Teeth : 17
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : With flanges

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1610 (40.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4025F12 (1610X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4025F12, so the bore size is 12.

No description for this product yet.

• Inner Diameter : 60 mm
• Outside Diameter : 90 mm
• High : 62 mm
• Screws : 10
• Type of Screws : M8

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 103.74 mm
• Outside diameter + flange: 108 mm 
• Teeth : 26
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 40 mm 
• Outside diameter of the hub : 24.5 mm 
• Total length : 50 mm 
• Length of sleeve : 37 mm