• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 112.75 mm
• Outside diameter + flange: 118 mm
• Teeth : 36
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1108 (28.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2820F10 (1108X10MM), so the max bore is 28 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2820F10 (1108X10MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2820F10, so the bore size is 10.

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 85.21 mm
• Outside diameter + flange : 94 mm
• Teeth : 34
• Type of bush : 1610 
• Belt width : 20 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

• TRASCO® ES is our zero backlash coupling designed to compensate for misalignment and vibration dampening for indexing applications. The compact design of TRASCO® ES makes it the right choice for all precise motion applications.
•  
• This type of coupling premits quick, sure fixing, without any shaft-hub backlash.
•  
• Product detail 
• Outside diameter : 30 mm
• Max bore : 15 mm
• Material : Aluminum 
•  
• The M coupling type is available with or without keyway.
• Approved according to EC standard ATEX 94/9/EC.

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 59.74 mm
• Outside diameter + flange : 67 mm 
• Teeth : 24
• Belt width : 50 mm
• Type of pulley : 1
• Material : Steel 
• Flange : With flanges 

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 151.42 mm
• Outside diameter + flange : 158 mm
• Teeth : 60
• Belt width : 85 mm
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges 

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1610 (40.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4025F12 (1610X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4025F12, so the bore size is 12.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 110.67 mm
• Outside diameter + flange : 121 mm
• Teeth : 44
• Type of bush : 2012
• Belt width : 50 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 227.81 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3020
• Belt width : 50 mm
• Type of pulley : 7
• Material : Cast iron
• Flange : Without flanges 

• TRASCO® couplings are dimensionally manufactured to hub types "A" and "B", the difference being the maximum shaft diameter which hubs can accpet (corresponding respectively to the first and second code number). The long hub execution "L" (allows full coverage of the motor shaft) is available in both "A" and "B" execution.
•  
• Product detail 
• Outside diameter : 65 mm
• Max bore : 38 mm
• Length : 180 mm 
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 24 mm
• Outside Diameter : 50 mm
• High : 20 mm
• Screws : 8 
• Type of Screws : M6

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 78.07 mm
• Outside diameter + flange: 88 mm 
• Teeth : 26
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 122.12  mm
• Outside diameter + flange : 134 mm
• Teeth : 28 
• Type of bush : 2012
• Belt width : 40 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 211.11 mm
• Outside diameter + flange : 216 mm
• Teeth : 48
• Type of bush : 3020
• Belt width : 40 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 148.79 mm
• Outside diameter + flange : 158 mm 
• Teeth : 34
• Belt width : 55 mm
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges 

• Inner Diameter : 48 mm
• Outside Diameter : 80 mm
• High : 62 mm
• Screws : 8 
• Type of Screws : M8

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 264.59 mm
• Outside diameter + flange : 274 mm
• Teeth : 60
• Belt width : 55 mm
• Type of pulley : 8
• Material : Cast iron
• Flange : With flanges