No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 246.76 mm
• Outside diameter + flange : 261 mm
• Teeth : 56
• Type of bush : 3020
• Belt width : 40 mm
• Type of pulley :5
• Material : Cast iron
• Flange : With flanges 

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 126.57 mm
• Outside diameter + flange : 134 mm
• Teeth : 29
• Type of bush : 2012
• Belt width : 55 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• Type of belt : AT5
• Pitch : 5 mm
• Pitch diameter : 24.20 mm
• Outside diameter + flange: 30 mm
• Teeth : 16
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 211.11 mm
• Outside diameter + flange : 216 mm
• Teeth : 48
• Type of bush : 3020
• Belt width : 55 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• Type of belt : AT5
• Pitch : 5 mm
• Pitch diameter : 46.55 mm
• Outside diameter + flange: 50 mm
• Teeth : 30
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  `14 mm
• Pitch diameter : 398.28 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3535
• Belt width : 85 mm
• Type of pulley : 14
• Material : Cast iron
• Flange : Without flanges 

• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 638.92 mm
• Outside diameter + flange : -
• Teeth : 144
• Type of bush : 3535
• Belt width : 85 mm
• Type of pulley :14
• Material : Cast iron
• Flange : Without flanges 

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 95.65 mm
• Outside diameter + flange: 104 mm 
• Teeth : 24
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 24 mm
• Screws : 12
• Type of Screws : M8

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1210 (30.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3025F12 (1210X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3025F12, so the bore size is 12.

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 560 mm
• Outside Diameter : 567 mm
• Groove : 4

No description for this product yet.

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 630 mm
• Outside Diameter : 637 mm
• Groove : 5

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 630 mm
• Outside Diameter : 637 mm
• Groove : 6

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3039 (75.75)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7575F25 (3030X25MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example,BC7575F25 (3030X25MM), so the width is 75 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7575F25, so the bore size is 25.